DECH

Laser Cladding

Laser Cladding Series

Home / Products & Services / Laser Cladding Series

Series Overview

Laser Cladding Series

The Laser Cladding series is DECH's precision product line that uses high-energy laser beams to melt alloy powders and deposit them onto substrate surfaces. Laser cladding precisely controls heat input, delivering minimal thermal energy between the substrate and hardfacing layer to effectively manage distortion and dilution, with dilution rates typically below 10%. Due to this low dilution rate, alloy element loss is minimized and substrate hardening is controlled, keeping the heat-affected zone to a minimum. This results in a fine-grained microstructure that enhances wear and corrosion resistance of the deposited layer. Surface roughness can achieve Ra 0.8-1.6, ensuring high machining accuracy.

Laser Cladding Series

Product Scope

Specific Products

Laser cladding for precision shaft rollers

Laser Cladding for Precision Shafts and Rollers

Dilution rate <10% | Surface roughness Ra0.4-0.8

Uses a high-energy laser beam to melt alloy powder and deposit it onto the surface of precision shafts and rollers, creating a low-porosity, uniform, and dense clad layer. Precisely controls heat input to minimize thermal transfer between the substrate and hardfacing layer, effectively managing deformation and dilution. Ideal for wear and corrosion repair and strengthening of various precision shafts, drive shafts, printing rolls, and more.

Tablet Laser Cladding

Tablet Laser Cladding

Chrome alternative | Superior wear and corrosion resistance

The laser cladding layer is pore-free and metallurgically bonded, offering superior wear and corrosion resistance compared to chrome plating while being environmentally friendly and pollution-free.

Laser cladding of inner tube walls

Laser cladding of inner pipe walls

Minimal Heat-Affected Zone | Precise Deformation Control

Select a suitable wear-resistant material for laser cladding of the inner tube wall. Minimum tube diameter: 8 mm; maximum tube length: 2400mm.

Laser cladding of slender rollers

Laser cladding for slender rollers

Low heat input | Minimal deformation

To address the susceptibility of slender rollers to deformation, we employ low heat-input laser cladding for surface wear-resistant treatment. The minimal thermal input effectively controls roller deformation, ensuring machining precision. Ideal for wear repair and reinforcement of slender rollers, including conveyor rollers.

Laser Cladding Repair

Laser Cladding Repair

Custom Solutions | Precision Molding

Based on customer operating conditions, perform laser cladding repair on various pipe sections and custom components. Laser cladding precisely controls clad layer thickness and shape, reducing post-processing requirements. Ideal for localized wear resistance enhancement and repair of special-shaped components, offering customized laser cladding solutions.

Core Advantages

Why Choose This Series

Low dilution rate (<10%), minimal alloy element loss
Low heat input, minimal workpiece deformation
High machining precision with surface roughness Ra 0.8-1.6
Minimal heat-affected zone; base material properties remain unaffected.
Fine-grained structure with excellent wear and corrosion resistance.
Pore-free metallurgical bond layer with high bonding strength
Precisely control cladding layer thickness and shape
Eco-friendly process with no wastewater or exhaust gas emissions

Use Cases

Use Cases

Precision wear repair and strengthening for shaft components, chrome-plating replacement for hydraulic piston rods, wear repair and surface hardening for various molds, wear-resistant treatment for long, slender roller parts (paper machine rolls, printing rolls, conveyor rollers), localized wear-strengthening for plates, tubes, and custom-shaped components, and precision wear-resistant protection for critical equipment parts.

Need a custom solution?

Contact us to discuss your specific wear protection needs. Our engineering team will provide customized solutions.

Contact Us
DECH

Qingdao DECH Surface Technology Engineering Co., Ltd.

Dedicated to additive technology, empowering equipment upgrades

  • Office Center: Building 2, Science and Innovation Island, Bonded Zone, Huangdao District, Qingdao
  • R&D Center: Xiangwan Road, Bonded Zone, Huangdao District, Qingdao
  • Manufacturing Base: Weizishan Road, Yinzhu Subdistrict, Huangdao District, Qingdao

Core Process

  • Flux-cored arc welding
  • Submerged arc surfacing
  • Plasma Cladding
  • Laser Cladding
  • Supersonic Thermal Spray

Contact Us

High-Tech EnterpriseISO Three Systems

© 2006-2026 Qingdao DECH Surface Technology Engineering Co., Ltd.